|
| HOME>>Product>>ToolKits and Testers >>Plug N Check Cable Tester |
|
| Plug N Check Cable Tester |
|
Rate: |
|
|
|
 |
- Provides instant information on cable type and checks it for faults
- Button-free operation, just plug in the cable and the result is automatic
- Checks datacomm / network, voice / telecomm, cross over and shielded cables
- Low battery indicator prevents misreads
- Great for home office and commercial network installations and maintenance
|
|
 |
The CTK-PNC Plug N Check Cable Tester instantly identifies the cable type (datacomm/telecomm/coaxial) and test for faults. Operation is simple. Connect the ends of a cable to the tester, and the LED display provides the cable type information and checks the integrity of the cable automatically. A separate LED also checks the shielding integrity. Finally, its battery indicator will notify the user when the battery is low. The unit simplifies network installation and maintenance.
|
|
 |
|
Power
|
Main unit - 9V alkaline battery
Battery life - 60 hours (typical)
|
|
Size
|
Main unit - 4.57 x 2.67 x1.13 inch / 116mm x 68mm x 28mm
|
|
Weight
|
0.5 lb. / 140g with battery
Shipping weight - 0.75 lb. / 230g without battery
|
|
Operating Temperature
|
0 - 45 deg C (32 - 113 deg F)
|
|
Material
|
ABS
|
|
Built-in interface
|
RJ45 Jack- accepts both RJ45 & RJ11 plugs
|
|
Display
|
3 LEDs
|
|
Types of Test
|
Detects - crossover, straight through, cross pining, coax and faulty cables
|
|
Supported Cable Types
|
UTP, STP, T568 A / B, 10Base-2, BNC / COAX and USOC 8,6,4,2 cables.
|
|
Maximum Supported Cable Length
|
2,000ft. / 610m
|
|
|
|
|
|
|
 |
